B5X Motion Control System Manual (PDF)
Operating instructions, parameter references and setup information.
Free direct downloadB5X SERIES · RA-B58
RichAuto B58 4-Axis DSP Controller
4-axis 5-inch color-screen controller with rotary axis marking and optional handwheel.
4-Axis Linkage5-Inch ColorRotary A/C16I/8OHandwheel Opt.Power-Fail Rescue
Documented specifications differ by revision — verify before ordering.Replacing an existing controller? Send your current model label and machine configuration before ordering. We verify interface board, control signal, wiring and hardware revision wherever these affect compatibility.
IS THIS MODEL RIGHT FOR YOUR MACHINE?
B58 May Be a Good Fit If You Need:
Good fit for
- You need 4-axis control with a color-screen platform
- You run rotary or 3D carving work
- You want rotary-axis marking (A or C) and handwheel options
- You are upgrading from a monochrome 4-axis controller
Consider another model if you need
- You need ATC tool changing
- You want a simpler handheld without color display
- You must retain an unknown legacy interface board
SPECIFICATIONS
B58 Technical Specifications.
| Product model | B58 |
|---|---|
| Series | B5X |
| CPU | DSP |
| Internal memory | published 512 / 1000 (confirm by hardware revision) |
| Display | Color · 5-inch |
| Communication | U disk · USB cable |
| Controlled axes | 4 axes · 4-axis linkage (XYZ + rotary A/C) |
| Control signal | Differential |
| Drive system | Stepper / Servo |
| I/O | 16 inputs / 8 outputs · Optional 16I/16O expansion board with handwheel |
| Minimum input unit | 0.001 mm |
| Max. pulse frequency | published 1 / 4 (confirm by hardware revision) |
| Power supply | 24V DC |
| Interpolation | Line, Arc, Curve |
| Breakpoint resume | Supported |
| Power-failure recovery | Supported |
| Soft / hard limit | Supported |
| Password protection | Supported |
| Rotary axis | Supported |
| ATC support | Not supported |
| Multi-spindle / cylinders | Not supported |
| Plasma control | Not supported |
| Dispensing control | Not supported |
| Handwheel / MPG | Supported |
| Network / PC control | Supported |
KEY FUNCTIONS
What the B58 Brings to Your Machine.
- 4-axis interpolation motion control with rotary A/C marking
- 5-inch color screen for simulation and real-time tool-path viewing
- Standard 16I/8O board with optional 16I/16O expansion
- Expanded board supports handwheel operation
- 9 workpiece coordinates and 8 breakpoint positions
- Tool-broken breakpoint resume and intelligent power-failure recovery
COMPARE RELATED CONTROLLERS
Compare B58 with Related Controllers.
Related options help you avoid choosing a neighboring model by accident. Cards marked “different platform” are not direct replacements.
| Model | Main use | Axes | Display | I/O | Key capability | Relationship |
|---|---|---|---|---|---|---|
| B58 | 4-axis 5-inch color-screen controller with rotary axis marking and optional handwheel. | 4 axes | 5-inch | 16/8 | 4-axis 5-inch color-screen controller with rotary axis marking and optional handwheel. | This page |
Also see:
A12, A132, A14, B57 and F1410 are special-purpose models. Related cards there show platform comparisons, not interchangeability.
REPLACEMENT & UPGRADE NOTES
Ordering B58 as a Replacement.
Published B5X documentation can differ across hardware revisions for memory, communication and maximum pulse frequency, so CINKR does not use those fields alone to confirm B58 replacement compatibility. Provide the controller label, hardware information, interface-board photos and current wiring before replacing an existing B5X controller.
- B5X memory/communication/pulse specs conflict across documents
- Rotary axis wiring must match the A/C marking
DOWNLOADS
B58 Manuals, Wiring & Firmware.
Public manuals and general wiring references are free to download. Revision-sensitive firmware and diagrams are released after the controller details are verified.
B58 Stepper Board Wiring
Terminal definitions, interface connections and installation references.
Available after model / hardware verification — request it through CINKR.B58 Servo Board Wiring
Terminal definitions, interface connections and installation references.
Available after model / hardware verification — request it through CINKR.FAQ
B58 — Questions to Check Before Ordering.
Is B58 a direct replacement for B51 or B57?
Do not assume direct interchangeability from the B5X series name. B51, B57 and B58 serve different axis and machine configurations; verify the exact requirement before changing models.
Why do some B58 specifications differ between documents?
B5X information can vary by hardware revision or documentation version. Where published specifications conflict, CINKR treats the field as requiring verification.
Is B58 suitable for a rotary CNC machine?
B58 is a relevant option when 4-axis control and a color-screen platform are required; confirm rotary-axis configuration, drive signals and wiring before ordering.
Can I upgrade from a monochrome controller to B58?
It may be possible when the machine requirements match, but treat it as a platform upgrade: interface boards, wiring, I/O, signals and parameters may need to change.
REQUEST A QUOTE
Request a Quote for the B58
Tell us whether the B58 is for a new machine, upgrade, or replacement. Include existing hardware information where available. This form only prepares your message; nothing is submitted or stored.